Richmond Hill Forklift Training Schools

Richmond Hill Forklift Training Schools - What Could People Learn From Our Forklift Training Schools

Are you searching for work as a driver of a forklift? Our regulatory-compliant mobile equipment operator training offers instruction in types of lift trucks, pre-shift check, fuel kinds and handling of fuels, and safe operation of a lift truck. Hands-on, practical training helps participants in acquiring basic operational skills. Course content covers current rules governing the utilization of lift trucks. Our proven forklift courses are meant to offer training on these kinds of trucks: counterbalanced forklift, powered pallet trucks and narrow isle forklift.

When the forklift is in operation, do not lower or raise the forks. Loads must not extend above the backrest. This is due to the possibility of the load sliding back towards the operator. Inspect for overhead obstructions and make sure there is enough clearance before lifting a load. Stay away from overhead power lines. Once the load is lifted straight up, tilt it slightly back.

The lift truck is less stable if a load is in a raised position. Ensure that no body ever walks underneath the elevated fork. The operator should not leave the forklift while the load is lifted.

The forks must be level when handling pallets, and high enough to extend all the way into and beneath the load. The width of the forks should provide equal distribution of weight.

Prior to unloading or loading the truck, set the brakes and chock the wheels. Floors must be strong enough to support the weight of the forklift and the load combined. Fixed jacks could be installed in order to support a semi-trailer that is not attached to a tractor. The entrance door height should clear the forklift height by at least 5 cm. Edges of ramps, docks and rail cars should be marked and avoid them.

Click to Download the pdf